GPTFE + Aramid Packing is a graphited PTFE braided packing reinforced with aramid (Kevlar) yarns, supplied in two constructions by Kaxite, a China-based gland packing manufacturer and exporter. KXT7143 carries aramid yarns on the corners of a graphited PTFE braid — better lubricity and thermal conductivity than KXT7140, with wider application in high pressure working environments. KXT7153 is a zebra-braided multi-yarn construction combining graphited PTFE yarns with aramid yarns throughout — better lubricity and thermal conductivity than KXT7150. The range covers -150 °C to +260 °C, 25 bar rotating, 150 bar reciprocating and 200 bar in valve service, with 15 m/s shaft speed, pH 2–12 and density 1.45–1.65 g/cm³. Applications include reciprocating pumps, mixers, agitated reactors and valves in petrochemical, paper, sugar and power station plants. Supplied in 5 kg / 10 kg coils or as packing rings in sections from 5 mm to 25 mm, with wholesale, distributor, OEM and bulk RFQ terms quoted against the actual order.
GPTFE + Aramid Packing | KXT7143 & KXT7153 High Pressure Gland Packing from a China Manufacturer & Wholesale Supplier
KXT7143 is braided from graphited PTFE yarns with aramid (Kevlar) yarns on the corners. KXT7153 is a zebra-braided multi-yarn construction combining graphited PTFE and aramid yarns throughout. Both grades deliver the strength of aramid fibers with the low friction and good thermal conductivity of graphited PTFE, and are built for reciprocating pumps, mixers, agitated reactors and valves in petrochemical, paper, sugar and power station plants.
Export ChannelChina direct export · Ningbo / Shanghai loading
MOQQuoted by grade, section size and coil weight
FOB / CIFQuotation confirmed at order stage
Lead TimeStandard and rush schedule on quotation
Sample / Trial OrderSample order and trial order accepted
OEM / Private LabelOEM and private label available on request
Distributor / StockistDistributor and stockist terms on enquiry
GPTFE + Aramid Packing Manufacturer & Supplier in China — KXT7143 and KXT7153 for High Pressure Service
Buyers reaching this page usually search with one of three intents: they need a graphited PTFE + aramid packing manufacturer who can hold a high pressure specification, they need a China supplier who can ship coils and packing rings to a plant or distributor, or they are comparing KXT7143 against KXT7150 / KXT7140 and KXT7153 against the standard aramid construction. The information below is written for that comparison.
KXT7143Aramid-corner construction
The packing is braided from graphited PTFE yarns and enhanced with aramid (Kevlar) yarns on the corners. Compared with KXT7140, it has better lubricity and thermal conductivity, and wider applications in high pressure working environments.
KXT7153Zebra-braid construction
It is a multi-yarn packing zebra-braided from graphited PTFE yarns and aramid (Kevlar) yarns. Compared with KXT7150, it has better lubricity and thermal conductivity.
Why aramid corners vs zebra-braid matters on the shop floor
On KXT7143, aramid yarns sit on the four corners of the braid — the surface that touches the shaft and the stuffing box wall. The graphited PTFE core keeps friction low, while the aramid corners resist the extrusion and shear that a pure PTFE packing suffers at high pressure. On KXT7153, aramid yarns run through the whole braid in a zebra pattern, so the aramid reinforcement is present at every layer, not only at the corners. That makes KXT7153 the more uniform construction for reciprocating pumps where the packing is repeatedly compressed, while KXT7143 is often specified for high-pressure valve and reactor duty where corner extrusion is the failure mode.
What -150 °C to +260 °C and 200 bar really mean for a buyer
The -150 °C low end is the figure that matters for cryogenic and cold-loop petrochemical duty; the +260 °C ceiling covers hot process lines below steam-superheat conditions. Valve service up to 200 bar is the number most project buyers compare against, while rotating duty tops out at 25 bar and reciprocating duty at 150 bar. Buyers specifying this range are normally switching from a pure PTFE packing because the line runs above 100 bar or above 200 °C — below those thresholds a PTFE or aramid grade is usually the more economical choice.
Where this range sits inside the gland packing portfolio
Aramid Fiber Packing is the general aramid yarn grade for lower-pressure duties. Where the construction is PTFE-impregnated aramid rather than graphited PTFE with aramid, the PTFE + Aramid Packing page covers that alternative. For high temperature with a Nomex base, see Nomex Fiber Packing; for chemical resistance without aramid, see PTFE Packing; and the full Gland Packing range covers the remaining pump and valve positions.
Temperature-150~260 °C
Valve pressure200 bar
Reciprocating150 bar
Rotating25 bar
Shaft speed15 m/s
pH range2~12
Applications: Petrochemical, Paper, Sugar and Power Station Service
The packings feature the strength of aramid fibers, and the low friction and good thermal conductivity of graphited PTFE. Widely used in reciprocating pumps, mixers, agitated reactors and valves in petrochemical, paper and sugar industries, power stations, etc.
PetrochemicalReactors · Pumps · Valves
Paper MillsRefiners · Stock pumps
Sugar PlantsEvaporators · Agitators
Power StationsWater conditioning · Valves
Service Limits:
Property
Value
Temperature
-150°C~+260°C
Pressure — Rotating
25bar
Pressure — Reciprocating
150bar
Pressure — Valve
200bar
Shaft speed
15m/s
PH range
2~12
Density
1.45~1.65g/cm3
Forms of Supply:
In coils, e.g. 5kgs or 10kgs per coil;
As packing rings (KXT7143, KXT7153).
Dimension Table:
For packings with density of 1.55g/cm3
Size (mm)
Appr. m/kg
Appr. g/m
Kgs/coil
5
25.8
38.8
5
6
17.9
55.8
5
8
10.1
99.2
5
10
6.5
155.0
5
12
4.5
223.2
5
14
3.3
303.8
5
15
2.9
348.8
5
16
2.5
396.8
5
18
2.0
502.2
5
20
1.6
620.0
10
25
1.0
968.8
10
Buyer Questions Before Ordering
What is the difference between KXT7143 and KXT7153?
KXT7143 is braided from graphited PTFE yarns with aramid (Kevlar) yarns on the corners, giving better lubricity and thermal conductivity than KXT7140 and wider application in high pressure working environments. KXT7153 is a zebra-braided multi-yarn construction that combines graphited PTFE and aramid yarns throughout, giving better lubricity and thermal conductivity than KXT7150.
What are the service limits of GPTFE + Aramid Packing?
Temperature -150 °C to +260 °C; pressure 25 bar rotating, 150 bar reciprocating and 200 bar in valve service; shaft speed 15 m/s; pH 2–12; density 1.45–1.65 g/cm³.
Are you a manufacturer or a trading company, and can I buy direct from the factory?
Kaxite is a gland packing manufacturer based in Ningbo, China, producing the KXT7143 and KXT7153 constructions in-house. Buyers can purchase factory-direct without an intermediary, and distributor or stockist terms are available for buyers who require regular container volumes.
What is the MOQ and how is bulk pricing quoted?
MOQ is quoted against the grade, section size, coil weight and order quantity. Bulk pricing is a tiered quotation based on the total coil weight or ring count for the order, not a fixed list price. Send the section size, coil weight or ring count and annual volume for a formal RFQ response with MOQ, FOB / CIF terms, lead time and bulk price.
Do you support OEM and private label packing?
Yes. OEM and private label are available for buyers who need a specific brand, carton design or bag print. Supply both KXT7143 and KXT7153 under the OEM programme, and confirm the artwork and labelling requirement with the RFQ.
How is the packing supplied, and can I order pre-cut rings?
In coils, e.g. 5kgs or 10kgs per coil, or as packing rings for KXT7143 and KXT7153. Sections run from 5 mm to 25 mm; send the shaft diameter and stuffing box bore for a ring quotation.
How much packing does a repack need?
Use the metres-per-kg column. A 10 mm section yields approximately 6.5 m/kg, so a 5 kg coil gives about 32.5 m. For bulk ring orders, send ring count per pump and number of pumps per service interval, and the coil weight can be calculated.
Can I place a trial order or sample order before a bulk order?
Yes. Sample orders and trial orders are accepted so the packing can be tested against the actual shaft and medium before a container-load order or annual supply contract is placed. Technical datasheet, COA and MSDS are available with the quotation for internal approval and customs clearance.
Send your section size, coil weight and annual volume for a factory-direct quotation
Include the medium, temperature, pressure and whether you need coils or pre-cut rings. A formal RFQ response with MOQ, FOB / CIF terms, lead time, payment terms and bulk price is returned against the actual order. Distributor, stockist and OEM enquiries welcome.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy