KXT7400G Graphited Ramie Packing is braided from high quality ramie fibers and impregnated with graphite and lubricant oil. It is specified for low-friction duties where minimum shaft wear is essential, and is also ideal for marine use handling cold water, brine and cold oils. The packing covers -50 °C to +130 °C, 20 bar rotating, 60 bar reciprocating and 100 bar valve service, with 12 m/s shaft speed and pH 5–11. It is supplied in 5 kg or 10 kg coils, or as KXT7400G packing rings, in sections from 5 mm to 25 mm. Buyers can request a bulk quotation with MOQ, FOB terms, lead time and sample availability confirmed against the required section size and coil weight.
Graphited Ramie Packing KXT7400G | Low-Friction Gland Packing for Marine, Brine & Cold Oil Service | Bulk Supplier
KXT7400G is braided from high quality ramie fibers and impregnated with graphite and lubricant oil for very low friction and good corrosion resistance. It is the grade to specify when minimum shaft wear matters, and for marine duties handling cold water, brine and cold oils.
Graphited Ramie Packing Supplier for Low-Friction Marine Pumps and Valves — KXT7400G Specifications
KXT7400G Graphited ramie fiber packing
Braided from high quality ramie fibers and adequately impregnated with graphite and lubricant oil. It has outstanding characteristics of very low friction and good corrosion resistance.
For buyers comparing vegetable-fiber gland packings, KXT7400G sits in the Ramie Fiber Packing family and is often reviewed alongside Graphite Packing where graphite lubrication is the deciding factor. It also complements the wider Gland Packing range and the lower-cost Cotton Fiber Packing option.
Applications:
Low frictional applications where minimum shaft wear is essential. It is also ideal for marine use, handling cold water, brine and cold oils.
Why low friction matters in marine and cold-oil service
On a brine or cold-oil pump, shaft wear is rarely caused by pressure alone. It comes from dry running between repacks, from crystallised brine at the gland, or from cold oil that no longer carries a lubricating film at start-up. KXT7400G is impregnated with graphite and lubricant oil so the braid keeps a low-friction surface at the shaft. That is why it is specified where minimum shaft wear is essential, rather than simply where a low-cost packing is needed.
If the duty is a general water pump at moderate temperature, the lower-cost Vegetable Fiber Packing range may be sufficient. If the medium is aggressive or the temperature rises beyond the ramie limit, the selection should move to a synthetic or PTFE grade instead.
What the -50°C to +130°C range means in practice
The wide low-temperature end is the point of difference for cold-room, marine deck and cold-oil duties. The +130°C upper limit is a ceiling, not a target: it is suitable for warm process lines, but not for steam service or hot-oil loops above that figure. Buyers who only need ambient water service should not pay for a higher temperature grade they will never use.
What buyers should send with an enquiry
To quote KXT7400G accurately, send the shaft diameter, stuffing box section, medium, temperature, pressure, shaft speed and the required coil weight or ring quantity. MOQ, FOB terms, lead time and sample availability are then confirmed against the requested section size and coil quantity, rather than quoted as a generic price list.
Service Limits:
Property
KXT7400G
Maximum temperature
-50°C~+130°C
Pressure — Rotating
20bar
Pressure — Reciprocating
60bar
Pressure — Valve
100bar
Shaft speed
12m/s
PH range
5~11
Density
1.2~1.4g/cm3
Forms of Supply:
In coils, e.g. 5kgs or 10kgs per coil;
As packing rings (KXT7400G).
Dimension Table:
For packings with density of 1.3g/cm3
Size (mm)
Appr. m/kg
Appr. g/m
Kgs/coil
5
30.8
32.5
5
6
21.4
46.8
5
8
12.0
83.2
5
10
7.7
130.0
5
12
5.3
187.2
5
14
3.9
254.8
5
15
3.4
292.5
5
16
3.0
332.8
5
18
2.4
421.2
5
20
1.9
520.0
10
25
1.2
812.5
10
Buyer Questions Before Ordering
What is KXT7400G graphited ramie packing used for?
It is used for low-friction applications where minimum shaft wear is essential, and for marine service handling cold water, brine and cold oils. It is braided from high quality ramie fibers and impregnated with graphite and lubricant oil.
What are the service limits of KXT7400G?
Temperature -50°C to +130°C; pressure 20 bar rotating, 60 bar reciprocating and 100 bar in valve service; shaft speed 12 m/s; pH 5~11; density 1.2~1.4 g/cm³.
What is the MOQ and how is bulk pricing quoted?
MOQ is quoted against the section size, coil weight and quantity. Trial coils and mixed-size orders can be reviewed. Bulk pricing is confirmed after the section size and total coil weight are known, rather than taken from a single generic price list.
What FOB terms and lead times are available?
FOB terms are quoted from the loading port confirmed at order stage. Standard and rush lead times are confirmed against the coil or ring quantity, with ring production based on the supplied stem dimensions.
Can I get a sample before placing a bulk order?
Cut samples can be arranged on request. Sample availability and freight terms are confirmed before a bulk order, so the fit and handling can be checked against the stuffing box first.
How much KXT7400G do I need for a repack?
Use the metres-per-kg column. A 10 mm section yields approximately 7.7 m/kg, so a 5 kg coil gives about 38.5 m. Send the shaft diameter, stuffing box bore and number of rings and the required coil weight can be calculated.
Which sizes and coil weights are available?
Sections run from 5 mm to 25 mm. Packing is supplied in 5 kg coils for 5–18 mm and 10 kg coils for 20 mm and 25 mm, or as KXT7400G packing rings.
Include section size, coil weight or ring quantity, medium, temperature and pressure. MOQ, FOB and lead time will be confirmed against the actual order.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy